{"product_id":"diy-watermaker-kit-bring-your-own-pump","title":"DIY Watermaker Kit - Bring Your Own Pump","description":"\u003cdiv class=\"ledi-diy-details\"\u003e\n\u003cp\u003e\u003cstrong\u003eYour pump. Your build. A curated set of watermaker components.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe LEDI DIY Watermaker Kit brings together the membrane assembly, feed pump, filtration, valves, instruments and plumbing components for your own reverse-osmosis watermaker project. Choose your housing configuration, membrane brand and feed-pump voltage, then pair the kit with a suitable high-pressure pump and motor that you supply, or add one of our matched pump packs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis is an unassembled parts kit.\u003c\/strong\u003e The high-pressure pump and motor are optional add-ons. The power supply, electrical protection and wiring are not included. It is intended for capable builders and installers with experience in high-pressure plumbing and electrical installation.\u003c\/p\u003e\n\u003ch2\u003eChoose your configuration\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e 1 × 2514, 1 × 2521, 2 × 2521, 1 × 2540 or 2 × 2540.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMembranes:\u003c\/strong\u003e WSD SW2514 for the 2514 housing, Vontron for the 2521 and 2540 housings, or Applied Membranes M-2521A for the 2521 configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeed pump:\u003c\/strong\u003e Nomad feed pump in 12V or 24V.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe voltage selection applies to the included feed pump. It does not specify the voltage or power requirement of your separate high-pressure pump. Select the available combination from the product options above.\u003c\/p\u003e\n\u003ch2\u003eWhat comes in the kit?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMembrane assembly:\u003c\/strong\u003e your selected pressure vessel(s) and RO membrane(s).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeed and pre-filtration:\u003c\/strong\u003e intake strainer, 5 m of 1\/2-inch intake tube, three 10-inch filter housings on a LEDI filter bracket, 20-micron and 5-micron pre-filters plus two spares of each grade, and a carbon filter for the fresh-water flush with its tee and check valve.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeed pump:\u003c\/strong\u003e a Nomad feed pump in your selected voltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-pressure hardware:\u003c\/strong\u003e pressure relief valve, 316 stainless steel needle valve, tees and connectors, 316L straight and pre-bent tubing, hex plug and stainless steel pressure gauge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrine plumbing:\u003c\/strong\u003e 5 m of 1\/4-inch brine tube, non-return valve, 3-way ball valve and the listed brine fittings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct-water plumbing and monitoring:\u003c\/strong\u003e 5 m of 1\/4-inch potable tube, inline single-channel TDS sensor, 10–100 L\/h flow meter and the listed product-water fittings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetup and maintenance:\u003c\/strong\u003e preservative chemical, PTFE thread seal tape, a filter housing spanner and a basic suggested build diagram.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee the detailed “What's included” section for the individual fittings and quantities. The supplied flow meter's 10–100 L\/h scale is an instrument range, not a production rating for the kit.\u003c\/p\u003e\n\u003ch2\u003eWhat do you need to supply?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eA suitable high-pressure pump and motor, with compatible connections and operating characteristics, unless you add one of our pump packs.\u003c\/li\u003e\n\u003cli\u003eA suitable power supply, battery disconnect, plugs, fuses and wiring.\u003c\/li\u003e\n\u003cli\u003eMounting and any additional hoses, adapters, fittings or installation hardware required by your layout.\u003c\/li\u003e\n\u003cli\u003eThe tools, skills and checks needed for assembly, installation and commissioning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck your proposed layout against the included-parts list before ordering. A curated kit simplifies parts sourcing; the final installation still needs to be matched to your pump, vessel and intended operating conditions.\u003c\/p\u003e\n\u003ch2\u003eAdd a pump pack\u003c\/h2\u003e\n\u003cp\u003eEach pump pack includes the high-pressure hose and the fittings to connect it to the kit. Choose the pack voltage to match your feed pump.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePumptec 107SS\u003c\/strong\u003e, 12V or 24V: suits 1 × 2514 or 1 × 2521.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCAT 2SF05 with a 1HP motor\u003c\/strong\u003e, 12V or 24V: suits 1 × 2514 or 1 × 2521.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCAT 2SF10 with a 1HP motor\u003c\/strong\u003e, 12V or 24V: suits 1 × 2521 or 1 × 2540.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCAT 2SF15 with a 1HP motor\u003c\/strong\u003e, 12V or 24V: suits any 2521 or 2540 option, including twin vessels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCAT packs include crankcase oil. Switches and control electronics are not included. Extra fittings, tube and spare filters can be added at the same time.\u003c\/p\u003e\n\u003ch2\u003eHow much water will it make?\u003c\/h2\u003e\n\u003cp\u003eThere is no single output or power-consumption figure for a bring-your-own-pump kit. Performance depends on the selected membrane configuration, your high-pressure pump, feed conditions and the completed installation. Confirm the operating requirements and limits for the selected components before choosing a pump or planning daily production.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/design.ledi.com.au\/\"\u003eTry the free LEDI Watermaker Explorer\u003c\/a\u003e to learn how pump and membrane choices affect estimated performance. Explorer results are preliminary learning estimates and do not confirm that a particular pump, kit or installation is suitable.\u003c\/p\u003e\n\u003ch2\u003eBefore you order\u003c\/h2\u003e\n\u003cp\u003eHave your pump make and model, pump performance data, available power supply, preferred membrane configuration and proposed installation layout ready when discussing your build with LEDI. Check component pressure limits, materials, connections, flow requirements and electrical requirements together.\u003c\/p\u003e\n\u003cp\u003eThe supplied relief valve must be suitable for the completed system and correctly configured. Its inclusion does not make an unknown pump compatible. The suggested build diagram is a starting point; assembly, mounting, wiring, plumbing, pressure testing, flushing and commissioning must be completed for your specific installation.\u003c\/p\u003e\n\u003ch2\u003eIs this the right option for you?\u003c\/h2\u003e\n  \u003cp\u003eChoose this kit if you want to build your own watermaker, with your own high-pressure pump or one of our pump packs, and take on the assembly and commissioning work. If you prefer a complete watermaker, explore the \u003ca href=\"\/products\/scout-sw20\"\u003eLEDI Scout\u003c\/a\u003e or \u003ca href=\"\/products\/nomad-watermaker\"\u003eLEDI Nomad\u003c\/a\u003e. For replacement components and maintenance supplies, browse \u003ca href=\"\/collections\/spares\"\u003ewatermaker spare parts\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LEDI Watermakers","offers":[{"title":"1 x 2514 \/ WSD \/ 12V","offer_id":53129295724856,"sku":"LEDI-DIY-BYOP-1X2514-WSD-NFP12","price":2547.0,"currency_code":"AUD","in_stock":true},{"title":"1 x 2514 \/ WSD \/ 24V","offer_id":53129295757624,"sku":"LEDI-DIY-BYOP-1X2514-WSD-NFP24","price":2547.0,"currency_code":"AUD","in_stock":true},{"title":"1 x 2521 \/ Vontron \/ 12V","offer_id":53129295790392,"sku":"LEDI-DIY-BYOP-1X2521-VON-NFP12","price":2597.0,"currency_code":"AUD","in_stock":true},{"title":"1 x 2521 \/ Vontron \/ 24V","offer_id":53129295823160,"sku":"LEDI-DIY-BYOP-1X2521-VON-NFP24","price":2597.0,"currency_code":"AUD","in_stock":true},{"title":"1 x 2521 \/ Applied Membranes \/ 12V","offer_id":53129239494968,"sku":"LEDI-DIY-BYOP-1X2521-AMI-NFP12","price":2787.0,"currency_code":"AUD","in_stock":true},{"title":"1 x 2521 \/ Applied Membranes \/ 24V","offer_id":53129239527736,"sku":"LEDI-DIY-BYOP-1X2521-AMI-NFP24","price":2787.0,"currency_code":"AUD","in_stock":true},{"title":"2 x 2521 \/ Vontron \/ 12V","offer_id":53129295855928,"sku":"LEDI-DIY-BYOP-2X2521-VON-NFP12","price":3397.0,"currency_code":"AUD","in_stock":true},{"title":"2 x 2521 \/ Vontron \/ 24V","offer_id":53129295888696,"sku":"LEDI-DIY-BYOP-2X2521-VON-NFP24","price":3397.0,"currency_code":"AUD","in_stock":true},{"title":"2 x 2521 \/ Applied Membranes \/ 12V","offer_id":53129239626040,"sku":"LEDI-DIY-BYOP-2X2521-AMI-NFP12","price":3787.0,"currency_code":"AUD","in_stock":true},{"title":"2 x 2521 \/ Applied Membranes \/ 24V","offer_id":53129239658808,"sku":"LEDI-DIY-BYOP-2X2521-AMI-NFP24","price":3787.0,"currency_code":"AUD","in_stock":true},{"title":"1 x 2540 \/ Vontron \/ 12V","offer_id":53129295921464,"sku":"LEDI-DIY-BYOP-1X2540-VON-NFP12","price":2777.0,"currency_code":"AUD","in_stock":true},{"title":"1 x 2540 \/ Vontron \/ 24V","offer_id":53129295954232,"sku":"LEDI-DIY-BYOP-1X2540-VON-NFP24","price":2777.0,"currency_code":"AUD","in_stock":true},{"title":"2 x 2540 \/ Vontron \/ 12V","offer_id":53129295987000,"sku":"LEDI-DIY-BYOP-2X2540-VON-NFP12","price":3757.0,"currency_code":"AUD","in_stock":true},{"title":"2 x 2540 \/ Vontron \/ 24V","offer_id":53129296019768,"sku":"LEDI-DIY-BYOP-2X2540-VON-NFP24","price":3757.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0872\/3811\/5640\/files\/ledi-diy-watermaker-kit-contents.png?v=1791866187","url":"https:\/\/www.lediwatermaker.com\/products\/diy-watermaker-kit-bring-your-own-pump","provider":"LEDI Watermakers","version":"1.0","type":"link"}